■ Removing and installing the battery
Before removing the back cover, always switch off the power, and disconnect the
charger from the device. Always store and use the device with the back cover
attached.
The headset has a rechargeable LiPo battery. To change it:
1. To open the battery cover, gently push the release button and slide the battery
cover backwards. See Figure 2.1.
2. Remove the battery. See Figure 2.2.
3. Detach the connector from its space, and detach the battery from the
connector. See Figure 2.3.
4. Replace the battery. Place the connector in the space reserved for it, and set
the battery in place. See Figure 2.4.
5. Close the battery cover. See Figure 2.5.
Copyright
©
2004 Nokia. All rights reserved.
11
6. Make sure that the cover is properly locked in place. See Figure 2.6.
Copyright
©
2004 Nokia. All rights reserved.
12